电液驱动水下发射筒开关盖装置高精度跟踪控制方法

吴友生, 程栋, 刘东

PDF(2407 KB)
欢迎访问液压与气动官方网站!
PDF(2407 KB)
液压与气动 ›› 2023, Vol. 47 ›› Issue (1) : 182-188. DOI: 10.11832/j.issn.1000-4858.2023.01.022
工程技术

电液驱动水下发射筒开关盖装置高精度跟踪控制方法

  • 吴友生1,2, 程栋1,2, 刘东1,2
作者信息 +

High Precision Tracking Control Method for Electro-hydraulic Underwater Launching Shaft Switch Cover Device

  • WU You-sheng1,2, CHENG Dong1,2, LIU Dong1,2
Author information +
History +

摘要

发射筒盖是潜射导弹发射装置的重要组成部分,目前主要采用调速阀进行开关盖速度控制,由于其无法保证动作精度,制约了系统的进一步发展。为提高开关盖过程的速度控制精度,以伺服阀代替调速阀进行开关盖动作控制;以开关盖装置为被控对象,设计高增益观测器观测系统状态量,抑制非线性对系统精度的影响,结合滑模控制器进行自适应控制,并将提出的控制算法分别应用于两种控制阀组。实验表明,开关盖装置结合伺服阀可实现更好的控制效果,采用高增益观测器的滑模控制速度跟踪效果较传统PID控制提升30%。

Abstract

The underwater launching shaft switch cover is an essential device for launching submarine-launched missile. At present, speed regulating valve is mainly used to control the speed of the switch cover, but the precision of the operation cannot be guaranteed, which restricts the further development of the system. So as to elevate the speed control precision of the switch cover, servo valve is applied to replace the speed regulating valve to control the switch cover. The underwater launching shaft switch cover was used as the control object, a high gain observer was used to observe the system state to reduce the influence of nonlinear on the system accuracy, and the sliding mode controller was used to carry out adaptive control. The suggested control algorithm has been employed to two control valve sets respectively. Experimental results show that the underwater launching shaft switch cover device combined with servo valve can achieve better control effect, and the speed tracking influence of sliding mode control using high gain observer is 30% superior to that of traditional PID control.

关键词

舰船开关盖 ; 电液伺服控制 ; 高增益观测器 ; 滑模控制

Key words

ship switch cover ; electro-hydraulic servo control ; high-gain observer ; sliding mode control


引用本文

导出引用
吴友生, 程栋, 刘东. 电液驱动水下发射筒开关盖装置高精度跟踪控制方法[J].液压与气动, 2023, 47(1): 182-188. https://doi.org/10.11832/j.issn.1000-4858.2023.01.022
WU You-sheng, CHENG Dong, LIU Dong. High Precision Tracking Control Method for Electro-hydraulic Underwater Launching Shaft Switch Cover Device[J]. CHINESE HYDRAULICS & PNEUMATICS, 2023, 47(1): 182-188. https://doi.org/10.11832/j.issn.1000-4858.2023.01.022

参考文献

[1] 韩小溪,刘洋.美国核潜艇装备技术未来发展研究[J].舰船科学技术,2020,42(19):179-181.
HAN Xiaoxi, LIU Yang. Research on the Future Development of U.S. Nuclear Submarine Equipment Technology [J]. Ship Science and Technology, 2020,42(19):179-181.
[2] 王瑞臣,杨海波,孙东平.潜射导弹发射方式综述[J].舰船电子工程,2021,41(4):8-12.
WANG Ruichen, YANG Haibo, SUN Dongping. Overview of the Launch Modes for Submarine-launched Missiles [J]. Ship Electronic Engineering, 2021,41(4):8-12.
[3] 张天赫,彭绍雄,王栋.发射潜空导弹对潜艇生存概率影响[J].火力与指挥控制,2018,43(8):75-80.
ZHANG Tianhe, PENG Shaoxiong, WANG Dong. Study on Influence of Lanching Submarine to Air Missile on Survival Probability of Submarine [J]. Fire Control & Command Control, 2018,43(8):75-80.
[4] 殷虎,徐越,何震.基于自抗扰控制技术的某舰船机械装置液压系统改进研究[J].机床与液压,2021,49(20):59-63.
YIN Hu, XU Yue, HE Zhen. Improvement of the Hydraulic System of a Ship's Mechanical Device Based on the Auto-disturbance Rejection Control Technology [J]. Machine Tool & Hydraulics, 2021,49(20):59-63.
[5] 管小兴,白林迎,李瑞.超越负载工况下大吨位轮式起重机闭式液压系统控制研究[J].液压气动与密封,2019,39(7):48-51.
GUAN Xiaoxing, BAI Linying, LI Rui. Research on Closed Circuit Hydraulic System Control of Large Tonnage Wheel Crane Under Over Load Condition [J]. Hydraulics Pneumatics & Seals, 2019,39(7):48-51.
[6] 郭晨冰,于朝,沈刚.基于自适应滑模控制器的发射井筒开关盖过程控制[J].液压与气动,2020,(1):100-106.
GUO Chenbing, YU Zhao, SHEN Gang. Process Control of Launching Shaft Switch Cover Based on an Adaptive Sliding Mode Controller [J]. Chinese Hydraulics & Pneumatics, 2020,(1):100-106.
[7] 于朝.水下发射井筒开关盖装置自适应控制研究[D].徐州:中国矿业大学,2019.
YU Zhao. Research on Adaptive Control of Underwater Launching Wellbore Switch Cover Devices [D]. Xuzhou: China University of Mining and Technology, 2019.
[8] 卫超,沈刚,殷士才,等.传感器故障下发射装置筒盖系统的容错控制[J].液压与气动,2021,45(12):93-99.
WEI Chao, SHEN Gang, YIN Shicai, et al. Fault Tolerant Control of Launcher Switch Cover System Under Sensor Malfunction [J]. Chinese Hydraulics & Pneumatics, 2021,45(12):93-99.
[9] 王军政,赵江波,汪首坤.电液伺服技术的发展与展望[J].液压与气动,2014,(5):1-12.
WANG Junzheng, ZHAO Jiangbo, WANG Shoukun. The Development and Future Trends of Electro-hydraulic Servo Technology [J]. Chinese Hydraulics & Pneumatics, 2014,(5):1-12.
[10] 陈元章.电液伺服阀初始设计理念与应用[J].机床与液压,2019,47(9):114-118.
CHEN Yuanzhang. The Initial Design Concept and Applications for the Electrohydraulic Servovalve [J]. Machine Tool & Hydraulics, 2019,47(9):114-118.
[11] 郑文明,刘雨,刘森.伺服阀科学使用的研究[J].机床与液压,2022,50(3):141-144.
ZHENG Wenming, LIU Yu, LIU Sen. Research on Scientific Use of Servo Valve [J]. Machine Tool & Hydraulics, 2022,50(3):141-144.
[12] 邵俊鹏,王伟,高炳微.电液位置伺服系统的BP神经网络辨识[J].控制工程,2018,25(2):183-187.
SHAO Junpeng, WANG Wei, GAO Bingwei. BP Neural Network Identification of Electro-hydraulic Position Servo System [J]. Control Engineering of China, 2018,25(2):183-187.
[13] 郝小星,王旭平.基于滑模自适应控制的电液位置伺服系统低速性能改善[J].液压与气动,2015,(1):39-43.
HAO Xiaoxing, WANG Xuping. The Low Speed Performance Improvements of Electro-hydraulic Position Servo System Based on Sliding Mode Adaptive Control [J]. Chinese Hydraulics & Pneumatics, 2015,(1):39-43.
[14] 刘龙,姚建勇,胡健,等.基于干扰观测器的电液位置伺服系统跟踪控制[J].兵工学报,2015,36(11):2053-2061.
LIU Long, YAO Jianyong, HU Jian, et al. Tracking Control for Electro-hydraulic Positioning Servo System Based on Disturbance Observer [J]. Acta Armamentarii, 2015,36(11):2053-2061.
PDF(2407 KB)

Accesses

Citation

Detail

段落导航
相关文章

/