为了研究工程机械用高压螺纹插装式溢流阀稳定性及动态响应性,针对高压螺纹插装式溢流阀结构特点,通过Routh判据给出了先导阀在任意工作点能够保持稳定的条件,分析出导阀稳定性影响因素。利用MATLAB/Simulink建立溢流阀状态空间方程仿真模型,以获得高响应、小超调为目标,对影响高压螺纹插装阀动态响应的多因素组合进行分析。针对多因素制定了12因素3水平正交试验表,并对12种结构分别利用状态空间方程进行计算仿真,得到影响溢流阀动态响应因素的主次顺序,为溢流阀的动态响应优化设计提供参考。
Abstract
In order to study the stability and dynamic response of high-pressure screw-in cartridge relief valve for construction machinery, according to the structural characteristics of high-pressure screw-in cartridge relief valve, the conditions under which the pilot valve can maintain stability at any working point are given through Routh criterion, and the influencing factors of pilot valve stability are analyzed. The state space equation simulation model of overflow valve is established by MATLAB/Simulink. In order to obtain high response and small overshoot, the multi factor combination affecting the dynamic response of high-pressure screw-in cartridge valve is analyzed. The 12 factor 3-level orthogonal test table is formulated for multiple factors, and the 12 structures are calculated and simulated by using the state space equation, and the primary and secondary order of the factors affecting the dynamic response of the overflow valve is obtained, which provides a reference for the optimal design of the dynamic response of the overflow valve.
关键词
高压螺纹插装式溢流阀 ;
稳定性 ;
正交试验 ;
动态响应
{{custom_keyword}} ;
Key words
high-pressure threaded cartridge relief valve ;
stability ;
orthogonal test ;
dynamic response
{{custom_keyword}} ;
基金
国家重点研发计划子课题(2020YFB2009801);国家自然科学基金面上项目(52175065)
{{custom_fund}}
{{custom_sec.title}}
{{custom_sec.title}}
{{custom_sec.content}}
参考文献
[1] 刘瑾.工程机械企业需抢抓变革新机遇[N].经济日报,2021-09-21(001).
LIU Jin. Construction Machinery Enterprises Need to Seize New Opportunities for Reform [N]. Economic Daily, 2021-09-21(001).
[2] 张海平.液压螺纹插装阀[M].北京:机械工业出版社,2011.
ZHANG Haiping. Hydraulic Screw-in Cartridge Valve [M]. Beijing: China Machine Press, 2011.
[3] DASGUPTAK, KARMAKARR. Dynamic Analysis of Pilot Operated Pressure Valve [J]. Simulation Modelling Practice and Theory, 2002,10(1-2):35-49.
[4] 柳波,刘方帅,刘宇翔,等.温度变化下多路阀动态响应仿真研究[J].机床与液压,2019,47(1):127-130.
LIU Bo, LIU Fangshuai, LIU Yuxiang, et al. Research on Multi-way Valves Dynamic Response Simulation Under Temperature Changes [J]. Machine Tool ＆ Hydraulics, 2019,47(1):127-130.
[5] 庹前进,刘敏.二通插装阀方向元件的动作响应特性研究[J].噪声与振动控制,2021,41(2):28-33.
TUO Qianjin, LIU Min. Research on Action Response Characteristics of Directional Components of Double-way Cartridge Valves [J]. Noise and Vibration Control, 2021,41(2):28-33.
[6] 闵为,王东,郑直,等.压力调节锥阀开启过程振动特性研究[J].振动与冲击,2020,39(18):181-187.
MIN Wei, WANG Dong, ZHENG Zhi, et al. Vibration Characteristics of Pressure Regulating Cone Valve during Opening[J]. Journal of Vibration and Shock, 2020,39(18):181-187.
[7] 陆亮,祝富强,訚耀保.插装式溢流阀流体自激振荡仿真研究[J].液压与气动,2019,(1):32-36.
LU Liang, ZHU Fuqiang, YIN Yaobao. Simulation Research of Self-sustained Oscillation for Cartridge Overflow Valve [J]. Chinese Hydraulics & Pneumatics, 2019,(1):32-36.
[8] 傅俊勇,范宇恒,董文勇,等.先导式溢流阀结构参数对泄漏的影响[J].液压与气动,2021,45(12):140-148.
FU Junyong, FAN Yuheng, DONG Wenyong, et al. Influence of Structural Parameters of Pilot Relief Valve on Leakage [J]. Chinese Hydraulics & Pneumatics, 2021,45(12):140-148.
[9] 姜万录,朱勇,杨超.直动型溢流阀非线性动力学行为研究[J].中国机械工程,2013,24(20):2705-2709.
JIANG Wanlu, ZHU Yong, YANG Chao. Study on Nonlinear Dynamics Behavior of a Hydraulic Relief Valve [J]. China Mechanical Engineering, 2013,24(20):2705-2709.
[10] 董文勇,李文顶,田欢,等.一种高压大流量插装式先导型溢流阀的仿真分析与优化设计[J].液压与气动,2021,45(10):125-133.
DONG Wenyong, LI Wending, TIAN Huan, et al. Simulation Analysis and Optimization Design of a High-pressure and Large-flow Cartridge Pilot Operated Relief Valve [J]. Chinese Hydraulics & Pneumatics, 2021,45(10):125-133.
[11] 李壮云.液压元件与系统[M].北京:机械工业出版社,2011.
LI Zhuangyun. Hydraulic Components and Systems[M]. Beijing: China Machinery Press, 2011.
[12] 王少平,高本金,尹树孟,等. 圆盘泵叶轮结构参数正交优化分析[J].石油矿场机械,2012,41(6):58-62.
WANG Shaoping, GAO Benjin, YIN Shumeng, et al. Optimization on Structural Parameter of Disc Pump Impeller Based on Orthogonal Digital Simulation [J]. Oil Field Equipment, 2012,41(6):58-62.
{{custom_fnGroup.title_cn}}
脚注
{{custom_fn.content}}
PDF(879 KB)
