针对一种新型十字摆盘驱动式水液压轴向柱塞泵的配流阀系统结构参数与泵转速、柱塞直径不匹配导致的容积效率不足的问题,搭建了该新型泵的ADAMS-AMESim固液耦合仿真模型。在额定转速下,分析了配流阀阀芯质量、弹簧刚度、弹簧预紧力、阀芯球面直径对其容积效率的影响,并对其配流系统进行优化设计。结果表明:新型泵的容积效率随着配流阀弹簧刚度、预紧力的增加而增加,随着配流阀阀芯质量、阀芯球面直径的增加而减少,且吸液阀结构参数的变化对容积效率影响大于排液阀。因此,在设计新型泵的配流阀时可适当提高阀芯复位弹簧刚度和预紧力,适当减小阀芯质量和阀芯球面直径,以提高新型泵的容积效率。
Abstract
In order to solve the problem of insufficient volumetric efficiency caused by the mismatch between the structural parameters of the check valve system of a new type of water hydraulic axial piston pump driven by a cross wobble plate and the pump speed and the diameter of the plunger, the ADAMS-AMESim solid-liquid coupling simulation model of the hydraulic pump is built. At the rated speed of the new pump, the influence of the check valve core mass, spring stiffness, spring preload and the spherical diameter of the valve core on the volumetric efficiency of the new pump is analyzed. And its check valve system is optimized. The results show that the volumetric efficiency of the new pump increases with the increase of the spring stiffness and preload of the check valve, and decreases with the increase of the mass and the spherical radius of the valve core. And, the influence of the structural parameters of the inlet valve on the volumetric efficiency is greater than that of the outlet valve. Therefore, in the design of the check valve system, the stiffness and preload of the spring of the check valve should be properly increased, the mass of the valve core and the spherical diameter of the valve core should be appropriately reduced, so as to improve the volumetric efficiency of the pump.
关键词
阀配流系统 ;
水液压 ;
轴向柱塞泵 ;
优化设计
{{custom_keyword}} ;
Key words
check valve system ;
water hydraulic ;
axial piston pump ;
optimized design
{{custom_keyword}} ;
基金
国家重点研发计划(2020YFB2077701);国家自然科学基金联合基金(U1738880);宁波重大科技专项(2019B10054)
{{custom_fund}}
{{custom_sec.title}}
{{custom_sec.title}}
{{custom_sec.content}}
参考文献
[1] 于兰英,王小兰,吴文海,等.阀配流式新型水压变量泵的动态性能仿真研究[J].机械设计与制造,2018,(6):70-73.
YU Lanying, WANG Xiaolan, WU Wenhai, et al. Dynamic Simulation of the Flat Valve Type of the New Water Hydraulics Variable Pump [J]. Machinery Design & Manufacture, 2018,(6):70-73.
[2] 王东,朱玉泉,李壮云,等.海水轴向柱塞泵配流方式的发展状况[J].液压与气动,2001,(7):29-32.
WANG Dong, ZHU Yuquan, LI Zhuangyun, et al. The Development of Plate Type in Seawater Axial Piston Pump [J]. Chinese Hydraulics & Pneumatics, 2001,(7):29-32.
[3] 胡国庆,李世伦,葛跃峥,等.海水柱塞泵动态性能的仿真研究[J].机床与液压,2011,39(7):86-87.
HU Guoqing, LI Shilun, GE Yuezheng, et al.Dynamic Simulation of a Seawater Plunger Pump [J]. Machine Tool & Hydraulics,2011,39(7):86-87.
[4] 韦春辉,冀宏,张培珍,等.超高压海水泵配流阀动态特性仿真研究[J].液压气动与密封,2020,40(3):10-13.
WEI Chunhui, JI Hong, ZHANG Peizhen, et al.Dynamic Characteristics of Distributing Valves in Super-high Pressure Seawater Pump [J]. Hydraulics Pneumatics & Seals, 2020,40(3):10-13.
[5] 黄国勤,于今,朱玉泉.水压柱塞泵配流阀动态特性仿真研究[J].中国机械工程,2011,22(4):443-446.
HUANG Guoqin, YU Jin, ZHU Yuquan. Dynamic Simulation on Flat Valve of Water Hydraulic Piston Pump [J]. China Mechanical Engineering, 2011,22(4):443-446.
[6] 贺小峰,杨明国,李壮云.水压柱塞泵配流阀的设计及试验研究[J].中国机械工程,2004,15(10):862-864.
HE Xiaofeng, YANG Mingguo, LI Zhuangyun. Design and Experimental Research on the Check Valves of Water Hydraulic Piston Pump [J]. China Mechanical Engineering, 2004,15(10):862-864.
[7] 李壮云.液压元件与系统[M].北京:机械工业出版社,2011:78-79.
LI Zhuangyun. Hydraulic Components and Systems [M]. Beijing: China Machine Press, 2011:78-79.
[8] 蔡昀彤.浅谈FMI建模技术的基本原理[J].科技创新导报,2017,14(17):14-134.
CAI Yuntong. On the Basic Principles of FMI Modeling Technology [J]. Science and Technology Innovation Herald, 2017,14(17):14-134.
{{custom_fnGroup.title_cn}}
脚注
{{custom_fn.content}}
PDF(2845 KB)
