我国国民经济和汽车工业的发展势头越来越好，载重汽车的保有量将会持续攀升，可是驾驶室翻转液压缸易损坏的问题却突出暴露出来，因此设计一种液压缸试验台就显得格外重要。试验台液压缸的模型被简化并且得到了出力位移曲线，依此作为设计的参考依据。该试验台软件部分可以根据已知条件算出相关参数，机械和电气部分可以试验验证液压缸工况。试验验证了该试验台效果良好,试验台的成功设计对于提高液压缸使用寿命，降低企业成本有着积极的参考意义。
Abstract
The development of our national economy and automobile industry is getting better and better. The number of vehicles will continue to increase. However, the prominent problem of easy damage for wheelhouse turning hydraulic cylinder is exposed, so a test bed is designed. A model of hydraulic cylinder is simplified and an outputdisplacement curve is obtained. This is a reference for design. The software part of the test bed can calculate relevant parameters according to known conditions. Mechanical and electrical parts can be tested to verify hydraulic cylinders working conditions. The experiment proves that the test bed is effective. The successful design of the experimental platform has a positive reference for improving service life of hydraulic cylinder and reducing the cost of enterprise.
关键词
驾驶室;液压缸;试验台;控制系统
{{custom_keyword}} ;
Key words
wheel house, hydraulic cylinder, test bed, control system
{{custom_keyword}} ;
{{custom_sec.title}}
{{custom_sec.title}}
{{custom_sec.content}}
参考文献
［1］杨春雨.某商用车驾驶室液压翻转系统研发［D］.青岛：青岛理工大学,2016:20-26.
YANG Chunyu. Research and Development of Hydraulic Turnover System for a Commercial Vehicle Cab ［D］. Qingdao: Qingdao University of Technology, 2016:20-26.
［2］姜帆．驾驶室的液压翻转机构设计［J］.汽车实用技术，2011,(4):25-28.
JIANG Fan. Design of Hydraulic Turnover Mechanism in Cab ［J］ . Automotive Practical Technology, 2011,(4):25-28.
［3］姜帆．基于MATLAB/Simulink在驾驶室液压翻转机构设计中的仿真分析研究［J］．汽车实用技术,2015,(3):18-20．
JIANG Fan. Based on MATLAB/Simulink Simulation Analysis in the Design of Hydraulic Turnover Mechanism in Cab ［J］. Automotive Practical Technology, 2015,(3):18-20.
［4］徐勇刚，何仁.重型汽车驾驶室电动/手动液压翻转机构［J］.重型汽车,2014,(1):10-13．
XU Yonggang, HE Ren. Heavy Duty Vehicle Cab Electric/Manual Hdraulic Tipping Mechanism ［J］. Heavy Duty truck, 2014，(1):10-13.
［5］徐金志．某重型卡车驾驶室翻转机构的设计［J］.汽车实用技术,2015,(11):39-42．
XU Jinzhi. Design of a Heavyduty Truck Cab Reversing Mechanism ［J］. Automotive Practical Technology, 2015，(11):39-42.
［6］杨彪，李建华，刘蕴博．某重型载货汽车驾驶室翻转液压缸下支架轻量化设计［J］.汽车工艺与材料,2017,(7):59-63．
YANG Biao, LI Jianhua, LIU Yunbo. Light Weight Design of a Heavy Duty Truck with Reverse Hydraulic Cylinder ［J］. Automobile Technology and Materials, 2017,(7):59-63.
［7］陈曼龙，刘侠，康青山．重型载货汽车驾驶室自解锁翻转机构设计［J］.汽车技术,2015,(5):38-40．
CHEN Manlong， LIU Xia， KANG Qingshan. Design of Selfunlocking Reverse Mechanism for Heavyduty Truck Cab ［J］. Automotive Technology, 2015,(5):38-40.
［8］周福庚，徐金志．重型车驾驶室翻转液压缸最优安装位置研究［J］.合肥工业大学学报,2013,36(1):42-45．
ZHOU Fugeng, XU Jinzhi. Study on the Optimal Installation Position of Hydraulic Cylinder in Heavy Duty Truck ［J］. Journal of Hefei University of Technology, 2013,36(1):42-45.
［9］陈林，蒋德云，李杰，等．某轻型卡车驾驶室翻转机构的结构设计与优化［J］.山东交通学院学报,2013,2（2）：25-28．
CHEN Lin, JIANG Deyun, LI Jie, et al. Structural Design and Optimization of a Lightduty Truck Cab Reversing Mechanism ［J］. Journal of Shandong Jiaotong University, 2013,2(2):25-28.
{{custom_fnGroup.title_cn}}
脚注
{{custom_fn.content}}
PDF(1787 KB)
