以插装型液压锥阀为研究对象,研究了几何结构参数及边界条件对锥阀流场及气穴现象的影响。按照实际使用中的插装型液压锥阀的参数,建立了锥阀的几何仿真模型,利用FLUENT软件多相流模型对插装型液压锥阀内的流场及气相分布情况进行了仿真计算,并与修改阀芯几何结构进行对比。研究表明:增大阀口开度,增大出口压力,并对阀芯结构进行修改后,插装型液压锥阀阀口气穴现象均可有效减弱。
Abstract
The hydraulic cartridge cone valve is chosen for the study of possibility to explore its effects of geometry parameters and boundary condition on flow field and cavitation of cone valve. The geometric model of the cone valve is established based on the actual parameters of the hydraulic cone valve. The flow field and the distribution of vapor phase are simulated by a multiphase flow model in Fluent and the results are compared by different geometry parameters of valve spool. It can be concluded that cavitation of hydraulic cartridge cone valve is reduced by increasing the opening stroke and the outlet pressure and changing the geometrical structure of valve spool.
关键词
插装型锥阀 ;
Fluent软件 ;
气穴 ;
仿真 ;
气相
{{custom_keyword}} ;
Key words
cartridge cone valve ;
Fluent ;
cavitation ;
simulation ;
vapor phase
{{custom_keyword}} ;
{{custom_sec.title}}
{{custom_sec.title}}
{{custom_sec.content}}
参考文献
[1] 李翔.液压系统的泄漏原因及应对措施[J].科技资讯,2011,(11):110,112.
LI Xiang, Reasons and Countermeasures on Leakage of Hydraulic System[J].Science and Technology Information,2011,(11):110,112.
[2] 杜学文,邹俊,傅新,等.节流槽结构对气穴噪声的影响[J].浙江大学学报(工学版),2007,3(3):456-460.
DU Xuewen, ZOU Jun, FU Xin, et al. Effect of Throttling Grooves Structure on Cavitation Noise[J]. Journal of Zhejiang University,2007,3(3):456-460.
[3] Posa A, Oresta P, Lippolis A. Analysis of a Directional Hydraulic Valve by a Direct Numerical Simulation Using an Immersed-boundary Method[J]. Energy Conversion & Management,2013,65(6):497-506.
[4] Lisowski E, Rajda J. CFD Analysis of Pressure Loss During Flow by Hydraulic Directional Control Valve Constructed from Logic Valves [J]. Energy Conversion & Management,2013,65(1):285-291.
[5] Kudma Z, StosiakM. Studies of Flow and Cavitation in Hydraulic Lift Valve[J]. Archives of Civil and Mechanical Engineering,2015,15(4):951-961.
[6] Washio S, Kikui S, Takahashi S. Nucleation and Subsequent Cavitation in a Hydraulic Oil Poppet valve[J]. Journal of Mechanical Engineering Science,2010,224(C4):947-958.
[7] 陈晋市,刘昕晖,元万荣,等.典型液压节流阀口的动态特性[J].西南交通大学学报,2012,47(2):325-332.
CHEN Jinshi, LIU Xinhui, YUAN Wanrong, et al. Dynamic Characteristics of Typical Hydraulic Notches[J]. Journal of Southwest Jiaotong University,2012,47(2):325-332.
[8] 王京涛,吴张永,岑顺锋,等.基于ANSYS的液压锥阀流场分析及结构优化[J].机床与液压,2011,33(13):128-130.
WANG Jingtao, WU Zhangyong, CEN Shunfeng, et al. Flow Field Analysis and Structural Optimization of Hydraulic Poppet Valve Based on ANSYS[J]. Machine Tool & Hydraulics,2011,33(13):128-130.
{{custom_fnGroup.title_cn}}
脚注
{{custom_fn.content}}
PDF(934 KB)
