分析电磁球阀的工作原理,设计出一款大流量的电磁球阀,并推导出其系统方框图和传递函数框图,利用Simulink软件进行仿真分析,得到电磁球阀的动态性能曲线。结果表明,设计的电磁球阀响应快,稳定性好,输出流量也有较大幅度的提升。
Abstract
The working principle of the solenoid ball valve is analyzed to design a high flow one. Its system block diagram and transfer function are established. Based on Simulink simulation, the dynamic performance curves of the valve are achieved. The results show that the solenoid ball valve has a fast response and a good stability, and the output flow rate increases quite remarkably.
关键词
大流量 ;
电磁球阀 ;
系统框图 ;
Simulink仿真
{{custom_keyword}} ;
Key words
high flow ;
solenoid ball valve ;
system block diagram ;
Simulink simulation
{{custom_keyword}} ;
基金
十二五山西省重大科技专项项目(201111010125)
{{custom_fund}}
{{custom_sec.title}}
{{custom_sec.title}}
{{custom_sec.content}}
参考文献
[1] 熊学慧,白虹.高水基液压系统元件性能的分析与应用[J].煤矿机械,2011,32(3):196-200.
[2] 范存德.液压技术手册[M].沈阳:辽宁科学技术出版社,2004:788-800.
[3] 刘同娟,金能强.电磁铁瞬态特性的仿真研究[J].低压电器,2005,(6):14-17.
[4] 韩向可,张河新,杨明杰,等.一种电液控制阀先导阀的动态设计与仿真[J].机床与液压,2007,35(5):133-137.
[5] Ye Qifang,Chen Jiangping.Dynamic analysis of a pilot-operated two-stage solenoid valve used in pneumatic system[J].Simulation Modelling Practice and Theory,2009,17(5):794-816.
[6] 张兴明.新型平衡阀的设计及仿真研究[D].太原:太原理工大学,2012:39-50.
{{custom_fnGroup.title_cn}}
脚注
{{custom_fn.content}}
PDF(732 KB)
